logo_1

"Material Handling & Waste Reduction Solutions"

Full Line Distributor - Servicing the Southeast since 1971

Craft_Pictures_0003a_truck


EQUIPMENT COMPANY
 
Phone: 800-888-4971

home > waste reduction solutions > compactors for front & rear load collection vehicles
 
SWFMenu Placeholder.
  Pak'ntainer - For Front or Rear Loader Collection Vehicles
 

The Pak'ntainer® (MPT): Available in 3, 4, 5, and 6 Cubic Yard Front Load and 6 Cubic Yard Rear Load Models.

The Pak'ntainer is a portable and economical self-contained compactor/container with a remote power pack. It's designed for compacting and containing wet or dry waste and simplifying waste dumping. The Pak'ntainer helps maintain a sanitary environment, while saving money, for those generating as little as 20 cubic yards of refuse a week.

Place Pak'ntainer wherever needed, whenever needed... temporarily or permanently... no anchoring, no concrete pad, no special surfaces required. Can be used alone or to "fill the gap" in combination with other units. The container is tapered to achieve superior compaction ratios and aid waste ejection eliminating excessive wear and tear on collection trucks. Liquid-tight construction helps insure sanitary environment. Drain allows water to be removed lowering disposal costs.

 

[ Brochure | Specifications ]

Added Value Features

  • Extra Low 42" Feed Height for convenient loading from side or rear of unit.
  • Large 46"x22 1/2" Clear Top Opening handles even large, bulky items.
  • Cycon Control System (for use with 3 phase only) eliminates all pressure and limit switches, dramatically improves cold weather performance and reduces maintenance costs and down time.
  • Fixed Breaker Bar Teeth help keep materials in container and charge box clear.
  • Hydraulic Plumbing To Both Sides With Quick Release Disconnects for added versatility in any application.
  • Tri-Voltage Standard for easy conversion to 208, 230, or 460 volt power.
  • Single Phase 110 with 3/4 HP Motor available at no additional charge.
  • Heavy Duty Hinges for durability.
  • Lockable Panel Box to increase security.

Optional Features Available

  • Hopper Enclosures
  • Security Chute
  • 90 Gallon Cart Dumpers
  • Ozone Generator
 

 
Structural Dimensions
   


Model
A"
B"
C"
D"
Weight (lbs)
MPT-6 RL
148 1/2
78
84 1/4
42
3,400
MPT-3 FL
78 7/8
81 3/4
59 1/4
42
2,600
MPT-4 FL
84 7/8
81 3/4
65 1/4
42
2,700
MPT-5 FL
90 7/8
81 3/4
71 1/4
42
2,800
MPT-6 FL
96 7/8
81 3/4
77 1/4
42
2,900
RL = Rear Load FL = Front Load
 
 
Specifications          
Total Capacity 
3, 4, 5 or 6 cy 
2.3, 3.1, 3.8 or 4.6 m3
Compactor Capacity 
 
0.5 cy 
.4 m3
Clear Top Opening 
46"W x 22 1/2"L 
1168mm x 572mm
Ram Face Size 
 
48"W x 20"H 
1219mm x 508mm 
 
 
Model
3cy FL
4cy FL
5cy FL
6cy FL
6cy RL
Total
2,600 lbs.
2,700 lbs.
2,850 lbs.
2,950 lbs.
3,400 lbs.
Weights
1,179 kg.
1,225 kg.
1,293 kg.
1,338 kg.
1,542 kg.
Lift
2,300 lbs.
2,400 lbs.
2,550 lbs.
2,650 lbs.
3,100 lbs.
Weights
1,043 kg.
1,089 kg.
1,157 kg.
1,202 kg.
1,406 kg.
FL = Front Load, RL = Rear Load
 
 
Performance Characteristics
 
 
 
 
Cycle Time 
28 s 
28 s
Force 
19,800 lbf 
88 kN
 
 
 
Ram Face Pressure 
20.6 psi 
142 kPa
Ram Penetration 
3 1/2" 
343 mm 
 
 
 
 
 
Electrical & Hydraulic Equipment
 
 
 
 
Motor 
3 hp 
2.24 kW
Pump 
3 gpm 
11.4 L/min
 
 
 
Pressure 
2400 psi 
166 bar
Cylinder Bore 
2 1/2" Ø 
64 mm
 
 
 
Cylinder Rod 
1 1/4" Ø 
32 mm
Cylinder Shaft 
18 1/2" L 
470 mm
 
 
 
Reservoir 
5 gal 
19 liters 
   
 
©Copyright Craft Equipment 2009 | Home | Webmaster | eMail Us | Phone 800-888-4971 | Tampa 813-621-4971 | Fax 813-622-7956