Balers

Craft carries a complete line of both Vertical and Horizontal Balers to fill your specific needs. We encourage the use of a Baler in any business where materials can be removed from the waste stream and contribute to the wellbeing of our planet. Some of the materials that can be recovered and baled are: cardboard, office paper, newspaper and aluminium cans, just to name a few.

Craft Equipment is a dealer for American Baler, listed below are high quality models that we offer.

American Baler        29 Series

Baler type:  open-end, auto-tie, single ram, horizontal baler

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:                  

Nominal Feed Opening:  40” x 29”, 50” x 29”                                                            29 N Series

Nominal Bale Size:  30” x 43” x variable

Main Cylinder:  8”, 9” or 10” bore trunnion design          

System Pressure:  3000 psi

Main Motor:  20, 30, 50, 75, Twin 20, Twin 30 or Twin 50 HP

Feed Type:  Air trim system, conveyor

Bale tying:  Five wire auto-tie (optional manual tie)       

Shear:  Available with or without Shear Blade                                            

Suitable for baling:

Corrugated trim                                                                       

Converting trim

Printer’s shreds and trim

Folding carton trim

Shredded documents & Paper

High Grade Paper

 

American Baler   PAC Series

Baler type:  Open-end, auto-tie, single ram, horizontal baler             

Safety:  Meets all Current ANSI 245.51 Safety Standards                

Key Features:                                                                                                            Pac Series       

Nominal Feed Opening:  30” x 29”, 40” x 29”, 50” x 29”

Nominal Bale Size:  30” x 43” x variable

Main Cylinder:  6”, 7”, or 8” bore trunnion design

System Pressure:  3000 psi (6”, 7”), 2500 psi (8”)

Main Motor:  20, 30, 50, 75, Twin 20 or Twin 30 HP

Feed Type:  Air trim system, conveyor

Bale tying:  Five wire auto-tie (optional manual tie)

Suitable Material

Corrugated trim

Shredded documents

Printing shreds and trim

Folding carton trim

Clothing

 

American Baler     42W Series

 Baler type:  open-end, auto-tie, single ram, horizontal baler

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:                                                                                                                 42W Series  

Nominal Feed Opening: 50” x 42”, 60” x 42”, 72” x 42”

Nominal Bale Size:  43” x 43” x variable

Main Cylinder:  8”, 9” or 10” bore trunnion design

System Pressure:  3000 psi

Main Motor:  20, 30, 50, 75, Twin 20 or Twin 30 HP

Feed Type:  Conveyor(s), loader

Bale tying:  Five wire auto-tie (optional manual tie)

Shear:  Available with or without Shear Blade

Optional:  Fluffer

Suitable for baling:

OCC Boxes

Bulky OCC

ONP

OMP

High Grade Paper

Tin and Aluminum cans

Vented PET & HDPE Containers

Shredded Paper

Printer’s Waste

 

American Baler             Model PW3560

Baler type: Closed-door, full-eject, single ram, horizontal shear baler

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:                                                                                                              Model PW3560

Nominal Feed Opening:  60” x 35”

Nominal Bale Size:  60” x 30” x 45”

Main Cylinder:  8” bore trunnion design

System Pressure:  3000 psi

Main Motor:  20 HP

Feed Type:  Conveyor, hand, loader

Bale ties:  Six wire manual tie

Suitable for baling:

OCC

ONP

OMP

Tin and Aluminum cans

Vented PET & HDPE Containers

Shredded Documents & Paper

Printer’s Waste

 

American Baler       Model 8043HS

Baler type:  open-end, auto-tie, single ram, horizontal shear baler

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:                                                                                                                    Model 8043HS

Nominal Feed Opening: 80” x 43”

Nominal Bale Size:  43” x 43” x variable

Main Cylinder:  10” or 12” bore trunnion design

System Pressure:  3000 psi

Main Motor:  Twin 50 or Twin 75 HP

Feed Type:  Conveyor(s)

Bale tying:  Five wire auto-tie with 1000# wire feed system

Optional:  Fluffer

Suitable for baling:

OCC Boxes

Bulky OCC

ONP

OMP

High Grade Paper

Tin and Aluminum cans

Vented PET & HDPE Containers

Shredded Documents & Paper

Printer’s Waste

 

American Baler        Ram II Series

Baler type: Wide box two ram baler with shear

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:                      

 Nominal Feed Opening:  86” x 60”, 124” x 60” (long side-no stamper)

 Nominal Bale Size:  60” x 30” x 45”                                                                 

Ram 11 Series

 Main Cylinder:  11” bore with deep penetration into bale chamber

 System Pressure:  4000 psi (5000 psi optional)

 Main Motor:  Twin 50, Twin 75 HP or Triple 75 HP (Model 1124 only)

 Feed Type:  Conveyor(s), loader

 Wire tying:  Accent 470 or L&P Pinnacle II standard

 Combination bale release and bale separation door

 Optional:  Hydraulic Stamper at the Shear

Suitable for baling:

OCC, ONP, OMP

High Grade Paper

Vented PET & HDPE Containers

Tin & Aluminum Cans

Plastic buckets and drums

Copper radiators

Aluminum radiators

Old Aluminum sheet

Light Aluminum extrusions & Siding

Aluminum & Copper insulated wire

American Baler       DC Series

Baler type:   Open-end, auto-tie, single ram, horizontal baler

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:                                                                                                                   DC Series                    

Nominal Feed Opening:  50” x 43, 63” x 43”, 63” x 48”, 75” x 48”

Nominal Bale Size:  44” x 43” x variable or 48” x 42” x variable

Main Cylinder:  8” bore trunnion design

System Pressure:  2500 psi

Main Motor Options:  20, 30, 50, 75, Twin 20 or Twin 30 HP

Feed Type:  Conveyor(s), hand, cart dumper, air-fed shreds/trim.

Bale tying:  Five wire auto-tie (optional manual tie)

Suitable for baling:

Set-up single wall OCC boxes

Up to 10% OCC flats/sheets

Shredded OCC

Shredded documents and paper

 

American Baler       Wide Box 2 Ram Series

Baler type: Wide box two ram baler with shear

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:   

Models: W721, W828    

Nominal Feed Opening:  87” x 60”, 110” x 60” (long side-no stamper)

Nominal Bale Size:  60” x 30” x 45”                                                                              Wide Box 2 Ram Series

Main Cylinder:  12” bore trunnion design

Main Ram Penetration: Deep penetration into bale chamber

System Pressure:  3000 psi (W721), 4000 psi (W828)

Main Motor:  Twin 50, Twin 75 HP, or Triple 75 HP (Model W828 only)

Feed Type:  Conveyor, loader

Wire tying:  Accent 470 or L&P Pinnacle II standard

Combination bale release and bale separation door

Optional:  Hydraulic Stamper at the Shear

Suitable for baling:

OCC, ONP, OMP

High Grade Paper

Vented PET & HDPE Containers

Tin & Aluminum Cans

Plastic buckets and drums

Copper radiators

Aluminum radiators

Old Aluminum sheet

Light Aluminum extrusions & Siding

Aluminum & Copper insulated wire

 

American Baler      Model HS8543

Baler type:  open-end, auto-tie, single ram, horizontal baler

Safety:  Meets all Current ANSI 245.51 Safety Standards

Key Features:   

Nominal Feed Opening: 85” x 43”

Nominal Bale Size:  43” x 43” x variable                                                                        Model HS8543

Main Cylinder:  10” bore trunnion design

System Pressure:  4000 psi

Main Motor:  Twin 75 HP

Feed Type:  Conveyor(s)

Bale tying:  Five wire auto-tie with 1000# wire feed system

Optional:  Fluffer

Suitable for baling:

OCC Boxes

Bulky OCC

ONP

OMP

High Grade Paper

Tin and Aluminum cans

Vented PET & HDPE Containers

Shredded Documents & Paper

Printer’s Waste

                                                    

 PTR Vertical Baler

Craft Equipment is a certified dealer for PTR Baler and Compactor Company, a recognized source of high-quality products manufactured for safety and long life. They represent years of developmental design, testing and quality control.

These U.L. approved vertical balers are easy and safe to operate with a low maintenance cost. There are ten standard models ranging in size from 24” to 72” and can be used for multiple applications such as:

  • prt balerWarehouses
  • Drug stores
  • Supermarkets
  • Manufacturing plants
  • Department stores
  • Hotels & much more

Standard Features include:

  • Key-Operated ON/OFF Switch
  • Motor Overload Protectors
  • Extended Warranty
  • Starter Bundle of Bailing Wire and Poker Bar
  • Tri Voltage Motor
  • Factory Tested and Inspected
  • Safety/Operational Video

Marathon Heavy-Duty Vertical Baler

Craft Equipment is a certified dealer for Marathon Equipment balers which feature easy use and maintenance friendly access. The programmable Smart Relay adds diagnostic and trouble-shooting capabilities to the equipment while the fixed retainer teeth on the door and rear of the baler reduce material springback.

marathon heavy duty balerSome features include:

  • Redundant Interlock System for Added Safety
  • Standard Chain Bale Ejection is Manually Set After the Bale Door is Opened
  • Optional Automatic Bale Ejector Available
  • Automatic Feed Gate is Retracted for “Hands Free” Loading
  • Platen Features Replaceable Wear Pads and Cast Iron Shoe Guides
  • Standard Controls
  • Smart Relay Control System
  • Side-Mounted, Self-Contained Power Unit Convenient for Maintenance and Servicing
  • 10 HP Motor Submerged in Hydraulic Oil for Quiet and Efficient Running Operation
  • 56,550 lbs. of Force

For more information contact us today!